Users in the purchase of fruit preservation display cabinet, concerned about the price of more, concerned about the refrigeration effect of many, but also some people are concerned about power consumption, these are very important, there is the same material is also very important. Perhaps some people want to say, the material is almost on the line, anyway, put there and do not need to move. In fact, buy fruit preservation display cabinet, the material is also very important.
Fruit preservation display refrigerator materials have we see the appearance of materials, but also the internal use of materials, the following respectively. The beginning is the appearance of the material, if the material is poor, over time will corrode, light is dull, heavy is deformed scattered. Especially the placement of fruit shelves, if the material is poor, the heavy pressure of the fruit will lead to deformation of the shelves, on the one hand, affect the beauty, on the other hand, may lead to unstable placement of fruit and fall.
For internal materials, there are refrigeration system materials, refrigeration system piping is an important component, be sure to use copper pipe, many small manufacturers in order to reduce costs by using poor quality iron or galvanized pipe, usually no problem within a year, but after the winter, the next year and then open, the pipe will be corroded, the refrigeration system leaks lead to the inability to cool. This situation is no way to repair, because the repair cost is even higher than the manufacture of new fruit preservation cabinet, only scrap processing. So consumers must pay attention to the material of the refrigeration pipeline.
Insulation material is another important material of fruit preservation display cabinet, insulation material directly determines the power consumption of fruit preservation cabinet. Good insulation material, the cold air is not easy to leak, the compressor work to reach the set temperature, will stop running, the better the insulation material, the longer the stop, but also the more power saving. On the contrary, the insulation material is poor, even with ordinary foam board instead, although the cost is much lower, but the cold gas leakage is serious, very power consumption, the compressor is also easy to work for a long time and burned.