In many places, because there are no refrigerator manufacturers, the purchase of refrigerators must be transported through long-distance logistics. So what issues should we pay attention to during the transportation process? And how to place the freezer after it is transported to the destination, these all have a great impact on the normal operation of the freezer. Let's take a look at the professional knowledge in this area together with the price of the freezer. Points to pay attention to when moving the freezer: The feet should be lifted, and the handles of the door should not be grasped or force applied to the table and condenser, and it should not be collapsed on the ground. Otherwise, it will damage the compressor or cause the refrigerating oil in the compressor to flow into the refrigeration pipeline, which will affect the refrigeration and easily cause the compressor to bounce off. The maximum inclination angle of the cabinet cannot exceed 45 degrees, let alone inverted or horizontal. Prevent collision and severe vibration, and prevent rain and flooding during transportation. In this way, students can basically guarantee the safety of the freezer during transportation, and will not be unable to use it normally after arriving at the destination due to improper operation methods.
Then there are precautions for placing the freezer after arriving at the destination: Do not directly touch the sun, and should be placed away from heat sources. Since heat exchange with the outside is required during work, a condenser is used to dissipate heat to the outside. The higher the external environment temperature, the slower the heat dissipation, which will make the working time of the "freezer" longer, increase the power consumption, and reduce the cooling effect. Because the freezer shell, condenser and compressor are all metal materials, if the ambient humidity is too high, these parts will rust and shorten the service life of the freezer. At the same time, wetting and overheating to protect the environment will cause condensation on the surface of the freezer, which will affect the performance of Chinese electrical appliances. Install it in a local government with a good ventilation system or not too close to a wall, otherwise it will not be conducive to heat dissipation and will affect the effect of Chinese refrigeration technology. It should be placed on a flat, solid surface. It can also make the compressor work smoothly and reduce vibration and noise. It should not be placed in a place where the temperature requirement is too low. Because the temperature is too low, this makes the refrigeration performance of the freezer refrigerator poor and cannot be overcome.